Budget Fuel pump, made in China. For use on 1200-1600 type engines with an Alternator. Uses the "short" 100mm pushrod.
These pumps work fine and are cheap. Great spare parts pump for the roadside kit. We use a lot of these, and I suggest adding grease to the hollow cavity where the lever is.
ANY time you replace the fuel pump, check your fuel pressure. We have seen these pumps vary in output quite a bit and it is necessary to add gaskets to lower the pressure most of the time. We start with three top gaskets on these pumps. A stock carb would like about 3.5psi, and some aftermarket carbs like even less than that. If your pump is putting out 5, 6, 7psi you can over power the float.