Welcome to MR BUS CO!
$70.00 USD
– Sold OutMrBusCo Loves these kits! They should be standard equipment on all buses.
Will fit Left hand drive busses from 1967 to 1972 build date (Early Type 1 engine Bay)
This kit is an upgrade from the old worn out original unit (fits under the throttle pedal in the cab area).
Also this kit gives a smoother pedal action and a spring return on the throttle pedal itself.
Swivel joints on the pushrod from the pedal, and a sealed roller bearing in the main mount. The return spring stops you having to add extra springs on the carb`s.
Kit comes a return spring plus you now get the small 8mm spanner to help with fitting the joint to the pedal.Also a new addition is a return screw that once you have set the kit itself you can screw up to just nudge against the floor as a return stop . Later models came as standard , but they have added these to the early models as well now.
Install guide on Buttys Bits website: https://www.buttysbits.com/product/how-to/
© 2024 MrBusCo. 1432LLC, JOGR & BlazeCutUSA Powered by Shopify