Engine Tin
Doghouse Shroud, Black WITH Heat Ducts (Boxed) 36HP Style
$80.00 USD
These 36HP Style Shrouds feature excellent, tight fit and finish along with correctly engineered internal baffles. Doghouse models feature 9 internal Air Directional Baffles/Veins and use late model "Doghouse" cooler,...
Doghouse Shroud, Black WITHOUT Ducts (Boxed) 36HP Style
$75.00 USD
– Sold OutThese 36HP Style Shrouds feature excellent, tight fit and finish along with correctly engineered internal baffles. Doghouse models feature 9 internal Air Directional Baffles/Veins and use late model "Doghouse" cooler,...
New Single Port Cylinder Tin - PAIR
$29.00 USD
Single Port Cylinder Tin. This is what's available aftermarket and it is THE SAME from all manufacturers. You are buying a PAIR of L/R cylinder tin for dual port...
New Dual Port Cylinder Tin - PAIR
$29.00 USD
Dual Port Cylinder Tin This isn't as good as original tin. This is what's available, and it requires some effort to fit. We use this tin every single day on...
New Dual Port BUGGY STYLE Cylinder Tin - PAIR
$34.00 USD
Dual Port Cylinder Tin for Buggy Style/Exposed Engine This isn't as good as original tin. This is what's available, and it requires some effort to fit. We use this tin...
Rear Tin - NO Heat Riser / NO Heat Tubes
$15.00 USD $55.00 USD
Rear Tin, NO cut outs for heat risers, and NO cutouts for heat tubes. Josh's note: This tin needs work to fit right. We use this tin everyday and it is an...
Rear Tin - NO Heat Riser / WITH Heat Tubes
$29.00 USD
Rear Tin, NO cut outs for heat risers, and WITH cutouts for heat tubes. Josh's note: This tin needs work to fit right. We use this tin everyday and it is an...
Rear Tin - WITH Heat Riser / NO Heat
$29.00 USD
Rear Tin, WITH cut outs for heat risers, and NO heat tubes. Josh's note: This tin needs work to fit right. We use this tin everyday and it is an exercise in...
Rear Tin - Stock Style WITH Heat Riser / WITH Heat
$29.00 USD
Stock Style Rear Tin , with cut outs for heat risers, and cut outs for heat tubes. Josh's note: This tin needs work to fit right. We use this tin...
Front Tin - Doghouse Style "Late"
$29.00 USD
– Sold OutFront tin for doghouse style fan shroud engines. Josh's note: This is a great fitting piece of tin.
Front Tin - Early Style
$29.00 USD
– Sold OutFront tin for non-doghouse style fan shroud engines. Josh's note: This is a great fitting piece of tin.
Crank Pulley Tin
$14.00 USD
Crank pulley tin, installs behind pulley. Josh's note: This is a great fitting piece of tin.
Stock Valve Cover Kit
$25.00 USD
Fantastic replacement stock Valve Covers, Bales, and cork gaskets. This is a set of great fitting valve covers, premium cork gaskets, and fantastic tight bales. remember when installing the bales...
Stock Style Black Valve Covers (PAIR)
$18.00 USD
Fantastic replacement stock valve covers. Great stampings. These are the valve covers we use on our engines. We suggest new valve cover bales while you are at it!
Stock Valve Cover Bales
$8.00 USD
Nice Tight Bales. Remember when installing the bales that the bend on outer edge goes "up". If you have leaky valve covers that you just can't seem to fix, try...
Alternator Conversion Tin Kit
$15.00 USD
Upgrading your tired old generator to an alternator? This kit has the required backing tin to make sure your conversion works out! It has the two large backing plate tins...
Heater Channel 3pc Sled Tin Kit
$36.00 USD
The finishing touch to control engine heat. Fits between heater boxes and engine case. Josh's Note: These tins fit pretty well but you will need to bend it a bit...
Doghouse Tin - 2 Pieces With Seal
$39.00 USD
Doghouse Tin. This set includes both pieces needed to duct the hot air off the oil cooler through the front tin. The seal is also included. Josh's note: This is...
Air Deflector plate, Left
$16.00 USD
Tin piece that mounts to the left of the crank pulley, under the cylinder tin. Josh's Note: I'm sure this piece fits "something" as is, but I haven't found it. ...
Air Deflector plate, Right
$16.00 USD
Tin piece that mounts to the left of the crank pulley, under the cylinder tin. Josh's Note: I'm sure this piece fits "something" as is, but I haven't found it. ...
Cylinder Lower Deflector Tin
$2.00 USD
Lower Deflector tin, installed between cylinders. This is a "must" have part that is often left out of home rebuilds. These must be installed before the heads and pushrod tubes. ...
Heater Hose Clamp Kit
$8.00 USD
This is a great kit for installing your foil heater hoses! These hoses connect your fan shroud to your heater pods on the exhaust. Why dig around in your toolbox...
Fan Shroud Heater Output Plugs - EMPI Shrouds
$6.00 USD
Ditching your heat? These are an excellent way to block off your heater outlets on your EMPI aftermarket shroud, to preserve engine cooling while deleting heat. These fit EMPI shrouds.
Fan Shroud Plugs - Stock VW Shroud
$7.00 USD
Ditching your heat? These are an excellent way to block off your heater outlets on your stock shroud, to preserve engine cooling while deleting heat. These fit STOCK shrouds.